• Extensive use of CAE aimed at giving you optimum structural rigidity.
  • High rigidity, high damping linear guides on Y axis prevent excessive cutting vibration, and so substantially increase tool life.
  • Front-mounted Y-axis motor to reduce thermal displacement and increase stiffness of ballscrew. Also allows for fast, easy service of Y-axis.

Numerical Control Unit (FANUC OM-C, OM-F)

ITEM OM-C OM-F
Control axes 3 axes
Simultaneous controllable axes 3 axes
Minimum input 0.001mm
Feed rate override 0-150% O0-200%
Rapid traverse override FO, 25%, 50%, 100%
Dwell Per second dwell
Zero return Return to machine reference point: G27, G28, G29
work coordinate system selection G54-G59
Decimal point input/pocket calculator type decimal point input  
Tape Code EIA/ISO Automatic recognition
Cutter radius compensation G40, G41, G42
Backlash compensation -7~+7 Pulesepel (Backlash) Max. 9999 pulses
Follow-up At emergency stop, signal input
Machine continuous feed  
Machine lock  
Dry run  
Single block  
Data protection key  
Self diagnosis function  
Stored stroke check 1  
Background editing editing during automatic operation
Tool offset G43, G44, G49
Storage length 40M
Canned cycle G73, G74, G76, G80-G89
Conversational programming with graphic function Option Standard


Machine Specifications

ITEM MODEL vcenter-105
Travel X axis travel 1050mm
Y axis travel 560mm
Z axis travel 560mm
Table Table work area 1400mm x 550mm
Dimension of T-slot 5mm x 18mm x 100mm
Max. table load 800 kgs
Spindle Spindle taper BT40
Spindle motor AC 7.5kw/9.0kw (con./30min)
Spindle speed 6000 PRM
Feed rate Rapid feed rate 24/ 24/ 18m/min
Axis feed motor X/Y/Z AC 2.1kW/ 2.1kW/ 2.1kW
Cutting feedrate by table 1-5000mm/min
Max. tool length 300mm
Tools Max. tool weight 7kgs
Number of tools 32
Max. tool diameter 76mm
Tool exchange time 2.5sec
Tool selection random
Distance Spindle center to column 600mm
Spindle nose to table surface 180mm~740mm
Other Ball screw's diameter x Pitch X/ Y40mm x P12, Z40mm x P10
NC controller FANUC 0M-C
Full enclosed splash guard Standard
Net weight 7,500kgs

 

 

Victor Machinery (M) Sdn Bhd (193562-X)
No 2, Jalan PJS 11/16, Bandar Sunway, 46150 Petaling Jaya,
Selangor Darul Ehsan, Malaysia.
Tel: 603-733 7180, 733 6351
Fax: 603-733 7191